The pump kit you get with the HOTTAP OUTING comes with the following:
- 12V Pump Kit. This is a 6LPM pump with a pressure cut-off at 60PSI
- 1.5m suction hose with a plastic inline filter on one end. This plastic filter you would place into your bucket of water or jerry can. It's always a good idea to filter the water on the suction side of the pump. You don't want to be sucking up any gunk, or that could damage the pump.
- 2.5m outlet hose which you use to connect your pump to the HOTTAP.
- 7m lead with cigarette socket. (This is used to connect your pump to a power source)
- 1.5m lead with alligator clips. (Another lead to connect your pump to a power source)
The only other thing you would need is a bucket of water.