The HOTTAP Carry bag sizing is:
Absolutely! We will sell most of our major accessories separately, however, at the moment we're focusing on stabilising the supply of the core products so there might be a slight delay. But rest assured, the goal will be to have the accessories available for individual purchase as soon as we can.
Note, this includes things like the stands, sink, faucet & Ensuite plumbing, 12v pumps, filters, etc.
The Sink / Carry Tub is only compatible for the HOTTAP V2. It's been custom-designed to fit the new design of the HOTTAP V2.
The current model HOTTAP V1 has different front and rear panels. Whilst it will fit inside the sink / carry tub, the stand that comes with the sink / carry tub will not be compatible with the HOTTAP V1 (again, due to the different front and rear panels).
The HOTTAP V2 has been redesigned and has new front and rear panels. The stand (which is included with the HOTTAP Nomad) has been custom-designed to fit the HOTTAP V2. Because the HOTTAP V1 has different front and rear panels, the stand isn't compatible.
However, the feet attachment (included in the HOTTAP Essentials and the HOTTAP Outing) will be compatible with the HOTTAP V1. We'll be releasing an attachment in the near future which will allow you to use the feet with your current HOTTAP V1.
Quick Release Bracket
The same will unfortunately apply for the upcoming Quick-Release mounting bracket, which will not be backwards compatible with the HOTTAP v1 Unit.
Apart from that, all other accessories and fittings will suit the HOTTAP v1.
Information on how to mount your HOTTAP V2 using the Quick Release Mounting Bracket.
Using the Quick Release Mounting Bracket you can quickly and easily hang or mount your HOTTAP V2 to vertical surfaces.
- Size & Specifications of the Quick Release Mounting Bracket
- Inspiration on other ways to mount your HOTTAP (V1 & V2)
- Can I use HOTTAP V1 with the Quick Release Mounting Bracket?
Quick Release Mounting Bracket
Depending on which kit you have, HOTTAP V2 includes lightweight feet or a heavy duty stand. The next step in keeping your HOTTAP V2 'vertical' is the Quick Release Mounting Bracket. This bracket was custom designed with the V2 in mind, and integrates seamlessly with the back panel of the HOTTAP V2 unit.
Simply attach the bracket to a suitable vertical surface (here is some inspiration) and then effortlessly hang, and secure, your HOTTAP V2.
Attaching your HOTTAP V2 to the Quick Release Mounting Bracket
- Hold the HOTTAP V2 upright and tilt the top in, towards the bracket.
- Slightly raise the top panel of the bracket, tilt the unit back to centre and lower the unit onto the hooks.
The HOTTAP V2 has slits in the back panel that line up with the hooks on the bracket.
- Latch the straps of the top panel of the bracket to the knobs on the main section of the bracket.
This secures the HOTTAP V2 in place.
- Use a padlock to fend off prying hands!
Size & Specifications
Quick Release Mounting Bracket
HOTTAP V2 attached to Quick Release Mounting Bracket
Attaching the bracket to a wall or 4WD door.
|Q: Can I use my HOTTAP V1 with the Quick Release Mounting Bracket?
A: Yes you can. Follow these instructions.
|Q: The existing mounting holes don't work for me, can I drill other ones?
A: Yes you can. Just make sure to drill a minimum of 50mm apart.
Q: Can I leave this outside?
A: The bracket is fine to be left outside, but the HOTTAP is not.