We ship locally from a warehouse in your region.
In this article, we'll learn how to set up the HOTTUB (inflating), how to use the HOTTUB (recirculating water), and how to pack the HOTTUB.
Setting up the HOTTUB is as easy as a few steps:
Find the air valve on the side of your HOTTUB and twist to remove the cover.
2. Inside the air valve there is a white lock button. Make sure to have it "locked" to keep the air pressure in.
Connect the manual pump and start pumping. We recommend inflating your HOTTUB to around 2.2-5 PSI.
Once you're done pumping, remove the pump and put the valve cover back on.
Once the HOTTUB is inflated, you can start filling it with water.
Once your HOTTUB is filled, you can start recirculating the water!
The HOTTUB can be used in a couple of ways. Here we'll look at using it as a "hot tub" and explain how to recirculate the water.
If you'd like to see how to use the HOTTUB as an ice bath, click here!
Heating the water inside the HOTTUB will take around ~1.5-3 hours (depending on how warm the water was to begin with).
Tip: You can use the HOTTUB's insulated cover and keep the water warm for hours longer!
When you want to pack away your HOTTUB, you'll need to drain the water and then deflate and pack away the HOTTUB.