Getting Started with the Autolight
The Joolca Autolight is a compact, motion-sensor lantern that can be used in automatic or manual mode. You can mount it using the magnetic base or clip, and cycle through five brightness settings (including red light).
This article will walk you through setup, basic functions, and a few quick tips.
Click here to check out our product page for more info!
What's in the Box
1 x Autolight
1 x USB-C charging cable
1 x Spring clip (attached)
Key Specs
Dimensions: 110 x 40 x 48mm
Runtime: Max 100% ~4hrs | Low 25% ~12hrs | Red Light ~15hrs
Water Resistance: IPX4
Battery: 3500mAh
Charging: USB-C (cable included)
Brightness: 400lm, 4500K white LED + red light
Auto Shut-off: ~20s after no motion
Detection Range: ~5m
Controls: +/ – buttons adjust brightness: red, 25%, 50%, 75%, 100%. | Side switch toggles between Auto and Manual mode.
FAQs
Is the Autolight waterproof?
The Autolight has an IPX4 rating, which means it’s splash resistant. It can handle rain, humidity, and damp conditions, perfect for outdoor use!
How does the motion sensor work?
In Auto Mode (motion-sensor mode), the Autolight uses a sensor to detect motion within ~5 metres. When movement is detected, the light turns on automatically. If no motion is detected, it switches off after about 20 seconds.
Press the round button to activate the Auto Mode. You can toggle back to Manual Mode at any time.
Where is the Autolight available?
The Autolight will be available in the US and AU (from August) at this stage! We're still figuring out the details for other regions.