Articles in this section

HOTTAP V2 specifications

If you're after information about fittings, sizes, lengths, weights or other measurements for the HOTTAP V2, then this article is for you. 

 

HOTTAP dimensions

HOTTAP_V2_Sizing.png

Lightweight_Feet_Sizing.png

Heavy_Duty_Stand_Sizing.png

Shower head dimensions

Tub__showerhead___holder_overal_dimension_linework-04.png

Tub__showerhead___holder_overal_dimension_linework-02.png

Storage tub dimensions

Tub__showerhead___holder_overal_dimension_linework-03.png

Tub Storage Capacity: ~50 Litres / 14 Gallons

Tub__showerhead___holder_overal_dimension_linework-01.png

Specifications

HOTTAP Unit & Accessories
Dimensions: 450H x 290W x 170D mm (17.7H x 11.4W x 6.6D inches)
Weight: 4.3kg (2.2 lbs)
Approval number: GMK10121
Run Time with 9kg Bottle: ~15hrs
Battery:  2 x D-cell (for ignition only)
Heating capacity37,500 BTU
Flow rate:  2.5L - 6L per minute (0.6 - 1.5 GPM)
Max. temp:  50°C (122F)
Min. water Pressure: 70kPa
Max. water Pressure:  900kPa
Gas hose length:  1.2m (4 ft)
Shower hose length: 5m (16 ft)
Pump hose length: 4m (2m each side) / 13 ft (6.5 ft each side)
Nominal gas consumption: 28MJ/h
Boxed dimensions Essentials:L 565mm (22.24 inches) X W 360mm (14.17 inches) X H 330mm (13 inches) (20.29 lbs)
Boxed dimensions Outing:L 585mm (23.03 inches) X W 330mm (12.99 inches) X H 360mm (14.17 inches) (26.46 lbs)
Boxed dimensions Nomad:L 717mm (28.25 inches) X W 480mm (18.5 inches) X H 355mm (14 inches) (40 lbs)
 

 

Was this article helpful?
77 out of 110 found this helpful