The GottaGo toilet is designed with provisions for secure mounting. Mounting may be important in certain situations where you want to ensure that the toilet stays where it should, it may also be a compliance requirement in some regions (such as in New Zealand).
We are working on a mounting bracket accessory, however this is not very available with no estimated date of shipping (but it is actively being worked on).
It is possible to create a simple mounting system yourself. There are four threaded inserts (4mm thread) pre-installed into the bottom of your toilet, that you can reveal but peeling off the feet in each corner. This is also where our future mounting bracket will attach to.
It is possible to create a simple mounting system yourself. There are four threaded inserts (4mm thread) pre-installed into the bottom of your toilet, that you can reveal but peeling off the feet in each corner. This is also where our future mounting bracket will attach to.
When mounting your GottaGo, keep in mind you will need enough space at the rear to allow for the top compartment to hinge open to give access to the cassettes.
The Joolca mounting bracket could be a quick-release design which would allow you to position the toilet with less spacing at the rear.
The Joolca mounting bracket could be a quick-release design which would allow you to position the toilet with less spacing at the rear.