Learn how to fill the HOTTUB with water.
Click here for the full HOTTUB setup guide!
Once your HOTTUB is inflated, you can start filling it with water.
- If you're filling the HOTTUB from the top (not through the fittings), make sure that the light grey fittings inside the HOTTUB are tight so water doesn't seep out.
- If you're filling the HOTTUB through the hose fittings, make sure that the light grey fittings inside the HOTTUB are open a little so water goes through.
- Connect the pump outlet hose to the bottom blue fitting
- Drop the pump's inlet hose into a water source
- Start pumping until the water fills the HOTTUB
Once your HOTTUB is filled, you can start recirculating the water!