This article will cover how to install the HOTTAP 12V Power Adapter to your HOTTAP.
What you'll need:
- Screwdriver
Guide
- Take out your HOTTAP's battery compartment (this is only the battery compartment with the batteries).
- Unscrew the two screws from your battery box, as shown in the picture (the top left screw and the bottom right screw)
- Insert the HOTTAP 12V Power Adapter into your HOTTAP.
- Screw in the x2 screws to secure the HOTTAP 12V Power Adapter to the HOTTAP.
- Note: Don't overtighten the screws.