This guide will show you how to set up and control your HOTTAP from inside the ENSUITE Single Tent, use the internal organizers, and clean and store your tent.
Do you need help setting up your showerhead inside the tent first? Click here!
Controlling your HOTTAP from inside the tent
Set the HOTTAP's temperature and flow rate first before putting the showerhead inside the tent, but if you need to make adjustments on the fly, you can adjust the gas and water knobs outside through a slit in the side of the Ensuite Single.
Using the internal accessories
Care and Storage
To clean your Ensuite Single Tent:
1. Hose down the tent to remove dirt and mud.
2. Use mild dish soap and water to gently scrub any stains.
2. Rinse thoroughly with fresh water and lift the drain tab to let water flow out.
3. Wipe dry using a towel and open the door and windows to air dry.